1/2 HP EcoSeries Fountain
|
Motor |
1/2 HP |
Float Size (Dia.) |
34 Inches |
Fountain Wattage |
667 |
Wattage per High Output Bulb |
5 |
Fountain Voltage |
115V |
Fountain Running Amps |
5.8 |
Minimum Operating Depth |
24 Inches |
Maximum Spray Height |
14 Feet |
Included Patterns |
Classic, Crown & Trumpet, Trumpet |
Optional Fountain Nozzles |
Single Arch, Double Arch,
Double Arch & Geyser, Blossom Nozzle |
Optional Light Sets |
2, 4, or 8 RGBW LED Light Sets |
115V Control Panel Includes |
Dual Digital Timers up to 8 Run Cycles |
Control Panel Voltage/Amp Rating |
115V / 15A |
Control Panel Enclosure Type |
Thermoset Fiberglass |
Power Cord Lengths |
100', 150', 200', 250', 300', 350', 400' |
Protective Power Cord
Sleeve Options |
Standard, PolyFlex, & Stainless Steel Braiding |
Warranty |
3-Year |
Daily Fountain Operating
Cost (8 hours/day)* |
$0.53 |
Suggested Pond Size |
Up to 1/4 Acre |
*Daily Operating Cost is calculated at $0.10 per kilowatt hour. Please note that costs vary by location.
Spray Pattern Specs
|
Classic (Included)
|
Crown & Trumpet (Included)
|
Trumpet (Included)
|
Spray Pattern Dimensions |
6'H x 16'W |
Crown - 4'H x 32'W
Trumpet - 8'H x 4'W |
14'H x 7'W |
|
Single Arch (Optional)
|
Double Arch (Optional)
|
Double Arch & Geyser(Optional)
|
Blossom (Optional)
|
Spray Pattern Dimensions |
8'H x 16'W |
1st Tier - 10'H x 16'W
2nd Tier - 5'H x 38'W |
Geyser - 9'H
1st Tier - 7'H x 12'W
2nd Tier - 5'H x 34'W |
1st Tier - 4'H x 6.5'W
2nd Tier - 1.5'H x 11'W |
System Components in the Box
• Fountain Motor With Underwater Quick Disconnect
• 34" Fountain Float
• 115V/15A Control Panel
• Classic Spray Pattern (interchangeable)
• Crown and Trumpet Spray Pattern (interchangeable)
• Trumpet Spray Pattern (interchangeable)
• Fountain Power Cord With Strain Relief
*RGBW LED light set is optional. Light sets come with a light power cord, remote and 2, 4, or 8 light fixtures
When to Use
Airmax 1/2 HP EcoSeries Fountain creates a more enjoyable pond or lakefront living experience by pulling in water from the bottom of the motor and producing bigger, fuller, and more impressive flow patterns that are trajected into the sky.
Not only will a water fountain make a beautiful focal landscaping piece that passer-byers will notice, but the spray pattern also breaks the water tension, driving floating debris and algae to the water's edge or sink to the bottom. The improved water circulation also aerates shallow water ponds up to 6' deep, adding oxygen to the water and improving water clarity.
Installation
Please review the product manual and ensure you have power close to your pond before installing your fountain. If you do not have power close to your pond, we recommend to ALWAYS use a licensed electrician to properly run power down to the pond.
Plug & Play Control Panel: This control panel includes two 115 volt, 15 amp outlets ready to power one fountain and one optional light set. No hard wiring is required. Simply plug in the 24-inch power cord whip into a standard 115-volt outlet. In the event of a ground fault, a fast-acting circuit breaker will shut off the electrical power. The control panel features dual digital timers allowing your to independently program fountain and light run times up to 8 cycles.
Recommend Fountain Accessories (sold separately)
- Purchase a Mooring Kit to anchor your fountain to prevent it from moving with the wind and waves.
- Protect the fountain pump from debris getting into the chamber by placing a Fountain Filter Sock over the bottom of the fountain motor.
- Keep your intake screen and motor clean with D-Scale Cleaner. Just spray on and wipe off any limescale, calcium or rust stains with a soft cloth.